重慶升降平臺的升降系統和機器本身結構簡單,，且非常容易維護,，升降平臺的整個升降系統，是靠液壓驅動來實現的,，液壓油箱的主要作用是為了儲油,、散熱、分離油中所含空氣及消除泡沫,。所以為了不影響平時的工作,，下面就給大家詳細介紹一下應該如何選擇郵箱,。
 
1、需要考慮升降平臺的油箱容量,，升降平臺沒有一定的容量作為參考的保準,，一般移動式設備取泵最大流量的2～3倍，固定式設備取3～4倍,，基于這個標準,，廣大朋友可以選擇性的選擇油箱標準。
Fuel tank capacity to consider lifting platform Hangzhou, Hangzhou lifting platform without a certain capacity as a reference Guarantee, mobile devices generally take two to three times the maximum pump flow rate, fixed equipment to take 3 to 4 times, based on this standard, the majority of friends selection criteria can be selectively tank.

2,、使用油箱需要有自己得一個限度,，也就是需要設置油箱分界線，這樣在低于這個零界點的時候能夠自動發出提醒,，提醒你進行充油或者是更改其他的設置,，盡管如此，在選擇升降平臺這個臨界點的時候也是需要有很大將就的,，當系統全部液壓油缸伸出后油箱油面不得低于最低油位,，當油缸回縮以后油面不得高于最高油位。
Use the tank was a need to have their own limits, that is, you need to set the tank boundaries, so below this point when the zero bound can automatically send reminders to remind you to make oil-filled or change other settings, however, the choice of lift the critical point when the platform is also a great need will, and when the system is extended all the hydraulic oil tank must not fall below the minimum oil level when the oil level after retracting the cylinder shall not exceed the maximum oil level.

3,、升降平臺結構決定質量,，所以考慮油箱的結構能夠很大一部分彰顯其所承載得容量，應沿油箱縱軸線安裝一個垂直隔板,，此隔板一端和油箱端板之間留有空位使隔板兩邊空間連通,，液壓泵的進出油口布置在不連通得一端隔板兩側，使進油和回油之間的距離最遠,，液壓油箱多起一些散熱作用,。
Hangzhou lifting platform structure determines the quality, so consider the structure of the tank can highlight was a large part of its carrying capacity, install a vertical bulkhead along the longitudinal axis of the tank, leaving space between the end of the separator and the separator tank endplate connectivity on both sides of the space, the hydraulic pump oil inlet arranged in some cooling effect was not connected to one end of both sides of the bulkhead, and back into the oil so that the distance between the farthest oil, hydraulic oil tank more than.